Description
A characteristic feature of the heater is the steel tank construction without an external connection ring. The small
dimensions allow it to be used where space is limited. The surface of the heater is protected against corrosion by epoxy
powder coating. The plastic cover of the heater provides protection against moisture at the level of IP44 for the heater
and IP20 for the regulated thermostat. The heating chamber has a capacity of 1.05 liters.
The heating chamber is closed with a head in which a 400 W, 850 W or 1200 W radiator is mounted.
A fixed thermostat controls the model T and TS. The TR model is equipped with an adjustable thermostat with a value of
30 to 90 ° C.
The heater is designed to work in a horizontal position. It is possible to work almost vertically, slightly oblique,
with the nozzle and the lid up.
An optimally selected heating chamber capacity to the offered power significantly extends the life of the radiator and
minimizes the number of heating and standstill cycles, and this has a fundamental impact on trouble-free, long-lasting
operation of the heater.
Heater outlets are equipped with 3/4 "external or 1/2" internal pipe thread, allowing any screw-in fitting to be screwed
in.
Standard fittings for 16, 17, 18, 20 mm rubber hose or corrugated stainless steel hose 3/4 "(specified when ordering).
The heater heats the cylinder block in emergency power generators, construction and agricultural machinery. Prevents
problems associated with starting a cold engine. In continuous operation, it maintains a constant temperature of the
engine block in power generators.
The installation method is described in the instruction manual.
Reviews
There are no reviews yet.